LINK-PP Through-Hole Reflow Description:
LINK-PP RJ45 Connectors with Integrated Magnetics provide excellent
performance and EMI shielding for Ethernet interfaces. These RJ45
Ethernet jacks offer 10/100/1000BaseT performance speeds up to 10Gb
with or without PoE/PoE+ capabilities. Many 1xN, and 2xN port
configurations and an extended operating temperature range of -40°C
- +85°C, make the LINK-PP RJ45 Jacks suitable for industrial use.
The 0926 Series Integrated Magnetics RJ45 provides THT pins for
wave and reflow soldering. Among them, LPJG0926HENLS4R adopts
Through-Hole Reflow technology:
- 1. With thermoplastic PA46+30%G.F Housing Material with a high
melting point and low humidity absorption;
- 2. With a maximum reflow temperature of 250°C for 5 seconds,
ensuring optimal soldering performance;
- 3. With pins extending 2.40mm Pin Length from the PCB surface,
LPJG0926HENLS4R ensures optimal soldering effectiveness.
- LINK-PP's LPJG0926HENLS4R avoids the problem that soldering points
that are more than 1 mm away from the outer edge of RJ45 will not
be soldered correctly because the reflow heat does not completely
melt the solder paste;
- 4. The LPJG0926HENLS4R also features higher mechanical stability
than comparable RJ45 products due to the extra high standoff,
allowing better airflow and sufficient space for solder paste;
- 5. LINK-PP uses high-viscosity solder paste in through-hole reflow
(THR) soldering applications.
ELECTRICAL SPECIFICATIONS @25℃:
Part Number | LPJG0926HENLS4R |
|---|
Turn Ratio(±5%) | Pri∶Sec = 1CT∶1CT |
Inductance OCL | 350uH MIN @100KHz/0.1V,8mA DC Bias 120uH MIN @100KHz/0.1V,18mA DC Bias |
Insertion Loss | -1.0dB MAX @1-100MHz -1.2dB MAX @100-125MHz |
Return Loss | -16dB MIN @1-40MHz -12dB MIN @40-60MHz -10dB MIN @60-80MHz -8dB MIN @80-100MHz |
Cross talk | -30dB MIN @1-100MHz |
Common to Common Mode Rejection | -30dB MIN @1-100MHz |
DC Current/Voltage Rating pse Pins | 720mA MAX @57VDC(Continuous) |
Isolation PHY SIDE To Line SIDE | 1500Vrms |
Operating Temperature | 0℃ to 70℃ |
NOTES |
1. Designed to support applications, such as SOHO(ADSL modems),LAN-on-Motherboard(LOM),hub and Switches. 2. Meets IEEE802.3at specification. 3. Connector Materials: Housing: Thermoplastic PA46+30%G.F UL94V-0 Contact: Phosphor Bronze C5210R-EH Thickness=0.35mm Pins: Brass C2680R-H Thickness=0.35mm Shield: SUS 304-1/2H Thickness=0.2mm Contact plating: Gold 6 micro-inches min.In contact area. 4. Maximum reflow temperature: 250℃,5 Sec. 5. UL Certification: File Number E484635. |
IR Reflow:
Preheat:
Temperature(Ta-Tb):150-200℃
Time(t1-t2):60-180s
Holding Temperature:217℃
Time(TL):60-150s
Max Temperature(Tp):250(+0/-5℃)
Max Time(Tp):5s
The average speed:3℃/S Max
The average cooling speed:6℃/S Max
From 25℃ to Products out of the furnace:6 minutes Max
Packing:
Packaging unit:100 pcs/ reel
Packaging way: Carrier tape
Outer carton unit:600 pcs/6 Reel/box
Net Weight: 4.5 kg
Gross Weight:7 kg
