Specifications of L22N022-0 5G Base-T Magnetics Modules:
1. Designed to Support 5G/2.5G Base-T Transceivers.
2. Compliant with IEEE 802.3bz Standard.
3. Supports 4 pairs of category 6 or greater cable.
4. Cable interface for isolation and low common mode emissions.
5. Compliant with RoHS&Halogen Free requirements.
6. Qualified with top 5Gig PHY Manufacturers
7. RoHS peak reflow temperature rating 250℃
8. Low profile package for PCI Express
9. Fine-tuned magnetics to specific PHY vendors
10. Operating Temperature : 0°C to +70°C, Storage Temperature:
-25°C to +105°C.
L22N022-0 Electrical Specifications @25℃:
Type | Balance low pass 100Ω impedance |
Turns Ratio(±5%) | 1:1 |
Inductance | 160uHMin @ 100KHz, 0.1V, 8mA DC BIAS |
Insertion Loss | -0.5 dB Max @ 1-50MHz -1.0 dB Max @ 50-125MHz -2.0 dB Max @ 125-300MHz |
Return Loss | -20 dB Min load 100Ω @ 1-50MHz -20+8*log(f/50MHz) dB Min load 100Ω @ 50-200MHz -15+30*log(f/200MHz) dB Min load 100Ω @ 200-300MHz |
Reflected CM to Diff Conversion (REF) | -30 dB Min @ 1MHz -30 dB Min @ 50MHz -27 dB Min @ 100MHz -24 dB Min @ 200MHz -22 dB Min @ 300MHz |
CM to DM Conversion (REF) | -35 dB Min @ 1-50MHz -30 dB Min @ 125MHz -27 dB Min @ 200MHz -24 dB Min @ 300MHz |
| Reflected Diff to CM Conversion (REF) | -48 dB Min @ 1-10MHz -48+19*log(Freq MHz/10MHz) dB Min @ 10-300MHz |
CM to CM Attenuation | -25 dB Min @ 1-200MHz -20 dB Min @ 200-300MHz |
Cross Talk | -30 dB Min @ 1-125MHz -25 dB Min @ 125-300MHz |
Hipot Test | 1500Vrms Min |
L22N022-0 Recommended PCB Layout (Unit mm):
Component Side of Board
All dimension tolerance is ±0.08mm unless otherwise specified
Why Choose US?
High Yield Rate
LINK-PP has been synonymous with high quality for two decades, and
product excellence is our primary mission. From design and
development to production, sales, and after-sales support, we are
responsible for the reliability, stability, and durability of our
magnetic telecom & networking components. Adhering to strict
quality guidelines, we aim to provide more, higher-quality,
reliable, and secure products to our customers in communication,
industrial automation, telecommunications, and IoT. With the
self-developed machine vision system of LINK-PP Corp., We can
quickly detect and intercept defective products.
Short Lead Time
With a productive capacity of 6000k per month, LINK-PP combines
highly vertically integrated raw material processing and finished
product assembly processing through our automation capabilities to
ensure our ability to mass produce.
