KLA1S109-34 LF Fast Connectors Rj45 Integrated Gigabyte Filter
Quick Details
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR
1.RJ-45 needs to be matched FCC standard
2.Complies with requirement of IEEE802.3u standards.
3.RJ 45 connector with 10/100 BASE-TX magnetic.
4.Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+,
No PBB and PBDE and No Pb on external pins.
5.Operating temperature range: 0℃ to +70℃.
6.Storage temperature range: -25℃ to +125℃
7.Designing Model: 【KLA1S109-34 LF】
8.Mass Production Model:【LPJG0801BANL】
MAG.REVERSE LATCH ,
LED optional ; EMI-finger Optional.
Description
| 1x1 Port RJ45 Female Connector with 10/100/1000 Base-T Integrated
Magnetics,Yellow/Green LED,Tab Down,RoHS |
| LINK-PP Part Number | LPJG0801BANL |
| Bothhand Part Number | KLA1S109-34 LF |
| Application-Lan | ETHERNET(NoN PoE) |
| AutomDX | YES |
| Bst Circuit | YES |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Cores per Port | 8 |
| Diodes | NO DIODES |
| LED Option | Yellow/Green LEDs |
| Latch | TAB Down |
| Number of Ports | 1X1 |
| PCB | FR4 |
| PCB Mount Angle | SIDE ENTRY |
| PCB Retaining Post | T POST |
| Package Height (Inches) | 0.528 |
| Package Height (mm) | 13.40 |
| Package Length (Inches) | 0.839 |
| Package Length (mm) | 21.30 |
| Package Width (Inches) | 0.626 |
| Package Width (mm) | 15.90 |
| Pin Type | THT SOLDER |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | without |
| Speed | 10/100/1000 BASE-T |
| Temperature | 0 TO 70℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR , meeting IEEE 802.3/ af/at
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top
Entry(Vertical)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
Reflow-Soldering Optional;
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
11.Hipot:
1500Vrms MIN
Applications For Terminal User
Designed to support applications, such as ADSL modems,
LAN-on-Motherboard. Networking and communication equipments such as HUB, PC card,
Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways
setup,Border Gateway Protocol,fast ethernet switch ...
Competitive Advantage
18 years production experience,
2600 staff,
100% test
Flexible delivery time
Main Customer
Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics
,Cypress, Freescale,EKF.......
EMS Application
Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly;
Microelectronic, Flip Chip; Microelectronic, Chip On Board;
Optoelectronic Assembly; RF / Wireless Assembly; Through Hole
Assembly; Surface Mount Assembly; System Assembly; Printed Circuit
Board Assembly
