DA4T10303 Stacked Rj45 Connectors 2x6 Integrated Gigabit Ethernet
Modular Jack
| DA4T10303 | Stacked Rj45 Connectors | Stacked RJ45 Modular jack | Rj45 Stacked Connectors |
10/100/1000 Base-T RJ45 2x6 Integrated Magnetics Connector
1.Complies with requirement of IEEE 802.3ab standards.
2.RJ-45 connector integrated with transformer/impedance
resistor/high voltage capacitor.
3.Size same as RJ-45 connector to save PCB board space.
4.Reduced EMI radiation to improve EMI performance.
5.Design for 10/100/1000 BASE transmission over UTP-5 cable.
6.Compliance with ROHS requirements.
7.Operating temperature range: 0 to +70 . ℃ ℃
8.Storage temperature range: -25 to +85 .
Designing Model: 【DA4T10303】
Mass Production Model:【LPJXXXXNL】
MAG.REVERSE LATCH ,
LED optional ; EMI-finger Optional.
Description
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top
Entry(Vertical)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
Reflow-Soldering Optional;
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
11.Hipot:
1500Vrms MIN
Applications For Terminal User
Designed to support applications, such as ADSL modems,
LAN-on-Motherboard. Networking and communication equipments such as HUB, PC card,
Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways
setup,Border Gateway Protocol,fast ethernet switch ...
Competitive Advantage
DA4T10303
18 years production experience,
2600 staff,
100% test
Flexible delivery time
Main Customer
Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics
,Cypress, Freescale,EKF.......
EMS Application
Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly;
Microelectronic, Flip Chip; Microelectronic, Chip On Board;
Optoelectronic Assembly; RF / Wireless Assembly; Through Hole
Assembly; Surface Mount Assembly; System Assembly; Printed Circuit
Board Assembly
Other Replaceable List
| LA1S109 LF / KLA1S109 LF | DA1D102K4 | KRU1S041F LF |
| DA4T10303 | DA6T001A3 | DA4T10304 |
| KLU1S041 LF/ LU1S041 LF | DA4T10303 | KRU1S516 LF |
| KLU1S041A LF / LU1S041A LF | DA4T103G3 | KRU1S041X-43 LF |
| LU1S041A LF / LU1S041C LF | DA1T002I3 | KRU1T041-34 LF |
| KLU1S041X LF / LU1S041X LF | DA1T101J1 | KRU1T041FR-44 LF |
| KLU1T041 LF / DA6T001A3 | DA4T103N3 | DA4T10303 |
| KLU1T516 LF / LU1T516 LF | DA4T10304 | KHU1S041F3 LF |
| KLA1S109 LF / LA1S109 LF | DA6T001A3 | KHU1S041Q3 LF |
| KLA1S109-43 LF / LA1S109-43 LF | DU1S201C4 | KHU1S041Q4 LF |
| KLU1S041 LF / LU1S041 LF | DU1T202A1 | KHU1S041Q5 LF |
| KLU1S041C LF / LU1S041C LF | DU1T202A3 | KHU1S041F7 LF |
| KLU1T041 LF / DA4T103G3 | DU1T202B3 | KHU1S041Q6 LF |
| KLA1T109-43 LF / LA1T109-43 LF | DU1T301A3 | DA4T10304 |
| KLA4S109 LF / LA4S109 LF | DU1T301B3 | HU1S041X LF |
| DA4T10303 | DA6T10303 | DA4T103G3 |
