ARJ11D-MDSH-A-B-GLU2 Single Port RJ45 With Integrated Magnetics For
ATM Switches
1. 1 X 1 Port Tab-up RJ45 With Shielded
2. 10 / 100M RJ45 Connector
3. Ethernet Interface RJ45 Jack
4. Alternate rf : ARJ11D-MDSH-A-B-GLU2
| Product Name | LPJxxxNL |
| Cross rf | ARJ11D-MDSH-A-B-GLU2 |
| Turns Ratio (Np:Ns) | 1:1; 1:1 |
| Height(mm) | 13.85 mm |
| Length(mm) | 25.65 mm |
| Width(mm) | 16.50 mm |
| Speed | 10/100 Base-T |
| LED Color | Green / Yellow |
| Mounting Feature | Side Entry |
Description:
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top
Entry(Vertical)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
Applications:
Used for networking and communication equipments such as HUB, PC
card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem
Competitive Advantage:
16 years production experience,
1100 staff,
100% test
Flexible delivery time
100% Tested (Not Just Batch Tested)
Meets IEEE 802.3 specification
Compliance with ROHS requirements
