JXD0-0002NL 8P10C Magnetic RJ45 Jack With10/100/1000Mbps
LPJG4887GENL
- 8P10C Magnetic RJ45 Jack LPJG4887GENL
- Telecom transformers and RJ45 modules Jack
- Cross Equivalent to JXD0-0002NL PulseJack
- IEEE 802.3 10/100/1000BASE-T Magnetic RJ45 Jack
- Rj45 Right Angle PCB Connector Without Indicators
- LPJG0887GENL : 0℃～70℃
- LPJG4887GENL : -40℃～85℃
| Shielded 1x1 Port RJ45 Female Connector with 10/100/1000 Base-T
Integrated Magnetics,Green/Yellow LED,Tab Down,RoHS |
| LINK-PP Part Number | LPJG4887GENL |
| Pulse Part Number | JXD0-0002NL / JXKM-0004NL |
| Application-Lan | ETHERNET(NoN PoE) |
| AutomDX | YES |
| Bst Circuit | YES |
| Configuration RX | T,C |
| Configuration TX | T,C |
| Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Cores per Port | 8 |
| Diodes | YES |
| LED Option | Green/Yellow |
| Latch | TAB Down |
| Number of Ports | 1X1 |
| PCB | FR4 |
| PCB Mount Angle | SIDE ENTRY |
| PCB Retaining Post | T POST |
| Package Height (Inches) | 0.524 |
| Package Height (mm) | 13.30 |
| Package Length (Inches) | 0.837 |
| Package Length (mm) | 21.25 |
| Package Width (Inches) | 0.627 |
| Package Width (mm) | 15.93 |
| Pin Type | THT SOLDER |
| RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
| Search | YES |
| Shield EMI Tabs | With |
| Speed | 10/100/1000 Base-T |
| Temperature | -40 TO + 85℃ |
| Turns Ratio RX | 1CT:1CT |
| Turns Ratio TX | 1CT:1CT |
ELECTRICAL SPECFICATIONS @25℃
1.Turn Ratio(±2%):
TX=1CT:1CT RX=1CT:1CT
2.Inductance OCL:
350uH MIN @100KHz/0.1V,8mA DC Bias
3.Insertion Loss:
-1.1dB MAX @ 0.1-100MHz
4.Return Loss:
-18dB MIN @ 1-40MHz
-14.5dB MIN @ 60MHz
-12dB MIN @ 80MHz
-10dB MIN @ 100MHz
5.Cross talk:
-40dB MIN @ 1-30MHz
-35dB MIN @ 30-60MHz
-30dB MIN @ 60-100MHz
6.Common Mode Rejection:
-40dB TYP @ 0.1-100MHz
7.Hipot Test:1500Vrms
8.Operating Temperature: -40℃～85℃
Why Choose Us
World’s Leader Supplier Of Integrated RJ45 Connector,Discrete
Magnetic Transformers And
Optical Transceiver Modules
Quality
World’s Leader supplier of Integrated RJ45 Connector and Discrete
Magnetic Transformers.Original materials suppliers are selected and appointed by Tyco
Electronic ,and then put into production at the standard of Tyco
Electronic .
• Manufactured under strict controls.
• ISO 9001:2008
• UL Certification
• Reach Cetitifaction
• RoHS compliance
• OEM Of TE(Tyco) For 9 Years
• Active Environmental policy
• Every module tested (not just batch tested)
Applications For Terminal User
Designed to support applications, such as ADSL modems,
LAN-on-Motherboard. Networking and communication equipments such as
HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone,
xDSL modem,Call Center solutions , Complex set top boxes , VOIP
gateways setup,Border Gateway Protocol,fast ethernet switch ...
Successful Customer:
• Cisco
LINK-PP Is the preferred supplier of Cisco.
LINK-PP LPJ0011DNL is used in gate way of Cisco. Jabil is the OEM
for this project.
• Siemens
LINK-PP Is the preferred supplier of Siemens.
LINK-PP LP6096ANL is used in medical equipment of Siemens.
Flextronics is the OEM for this project.
• Samsung
LINK-PP is the preferred supplier of Samsung.
LINK-PP LPJ0011BBNL is used in smart box of Samsung.
Jabil is the OEM for this project.
• Texas Instruments
LINK-PP is the preferred supplier of TI. Welcome to visit the TI
website, you will look at our logo "LINK-PP" on BeagleBone Board.
