ARJM11B3-805-AN-CW2 Single Port 2.5G Base-T Rj45 Jack Shielded
w/LEDs
| Part Status | Active | |
|---|
| Connector Type | RJ45 | |
|---|
| Number of Ports | 1 | |
|---|
| Number of Rows | 1 | |
|---|
| Applications | 2.5G Base-T, AutoMDIX | |
|---|
| Mounting Type | Through Hole | |
|---|
| Orientation | 90° Angle (Right) | |
|---|
| Termination | Solder | |
|---|
| Height Above Board | 0.535" (13.59mm) | |
|---|
| LED Color | Green | |
|---|
| Number of Cores per Jack | 8 | |
|---|
| Shielding | Shielded | |
|---|
| Features | Board Lock | |
|---|
| Tab Direction | Down | |
|---|
| Contact Material | - | |
|---|
| Contact Finish | Gold | |
|---|
| Operating Temperature | 0°C ~ 70°C | |
|---|
| Contact Finish Thickness | 6.00µin (0.152µm) |
|---|
1.Operating and Storage Temperature
Operating Temperature : 0°C to +70°C
Storage Temperature : -40°C to +85°C
2. RJ45 specifications
Insulation Resistance 500MΩmin.
Insertion force with the latch depressed 22N max
Removal force with the latch depressed 44N max
Locking Force of Plug Latch : 50N min. @ 60+/-5
sec Durability : 750 cycles
3. Performance and Test Description
Product is designed to meet electrical, mechanical and
environmental
performance requirements specified in below table. All tests are
performed at ambient environmental conditions per MIL-STD-1344A
and EIA-364 unless otherwise specified.
4. Packaging and Packing
All parts shall be packaged and packed to protect against physical
damage,corrosion and deterioration during shipment and storage.
5. Transmitter filter & Receiver filter
Type : Balance low pass 100Ωimpedance
Insertion loss : 1~100 MHz -1.0dB max.
Return loss : 1~30 MHz -18dB min. load 100Ω
30~60MHz -16dB min. load 100Ω
60~80MHz -12dB min. load 100Ω
80~100MHz -10dB min. load 100Ω
Common Mode Rejection
@ 1~100 MHz -30dB min.
Cross Talk
@ 1~100 MHz -30dB min.
Inductance @ 100KHz, 0.1V, 8mA DC BIAS
Input (R1-R2), Input(R3-R4), Input (R7-R8), Input(R9-R10): 350 μ H
min.
Hi-Pot Test
Input (R1-R2) To Output(C1-C2) : 1500Vac 60s or 2250Vdc 60s
Input(R3-R4) To Output(C3-C6) : 1500Vac 60s or 2250Vdc 60s
Input (R7-R8) To Output(C4-C5) : 1500Vac 60s or 2250Vdc 60s
Input(R9 - R10) To Output(C7 - C8) : 1500Vac 60s or 2250Vdc 60s
Emitting Color λ p (nm) Vf @If=20mA Ir @Vr=5V
Business partner
LINK-PP Is The Preferred Designer and Manufacturer of Intel, Intel
MinnowBoard MAX Supported by LINK-PP Magnetic RJ45
PN#LPJG16314A4NL.
For any further information,Welcome to visit www.intel.com, you
will find out our logo"LINK-PP" on MinnowBoard MAX .
Our Services
Customer Satisfaction:Please don't hesitate to contact us if you have any questions or
concerns before or after your purchase. We are committed to your
100% satisfaction.
Payment Terms:There are many payment methods available such as
TT/LC/DP/DA/Paypal/Western Union/MoneyGram
Return Policy:If you want to exchange your items received ,you must contact us
within 5 days of the receipt of your order .And you should pay
addtional shipping fees incurred and items returned should be kept
in their original status.
Feedback:Since your feedback is very important to our busines's development
,we sincerely invite you to leave positive feedback for us if you
are satisfied with our products and service ,it will just take you
one minute .Thanks a lot !
