1840409-6 Single Port RJ45 Magjack Connector Through Hole
10/100/1000 Base-T
| Series | MagJack® | |
|---|
| Packaging | Tray | |
|---|
| Part Status | Active | |
|---|
| Connector Type | RJ45 | |
|---|
| Number of Ports | 1 | |
|---|
| Number of Rows | 1 | |
|---|
| Applications | 10/100/1000 Base-T, AutoMDIX | |
|---|
| Mounting Type | Through Hole | |
|---|
| Orientation | 90° Angle (Right) | |
|---|
| Termination | Solder | |
|---|
| Height Above Board | 0.555" (14.10mm) | |
|---|
| LED Color | Green, Yellow - Green, Yellow | |
|---|
| Number of Cores per Jack | 8 | |
|---|
| Shielding | Shielded, EMI Finger | |
|---|
| Features | Board Guide, Decoupling Capacitance | |
|---|
| Tab Direction | Down | |
|---|
| Contact Material | Phosphor Bronze | |
|---|
| Contact Finish | Gold | |
|---|
| Operating Temperature | -40°C ~ 85°C | |
|---|
| Contact Finish Thickness | 50.0µin (1.27µm) | |
|---|
| Shield Material | Brass | |
|---|
| Housing Material | Polyethylene Terephthalate (PET), Polyester |
|---|
Description
FastJack ™ 1x1 Tab-Down Common Mode Choke RJ45 , Meeting IEEE 802.3/ af/at
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top
Entry(Vertical)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
Reflow-Soldering Optional;
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
11.Hipot:
1500Vrms MIN
Applications For Terminal User
Designed to support applications, such as ADSL modems,
LAN-on-Motherboard. Networking and communication equipments such as HUB, PC card,
Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways
setup,Border Gateway Protocol,fast ethernet switch ...
Competitive Advantage
18 years production experience,
2600 staff,
100% test
Flexible delivery time
Main Customer
Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics
,Cypress, Freescale,EKF.......
EMS Application
Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly;
Microelectronic, Flip Chip; Microelectronic, Chip On Board;
Optoelectronic Assembly; RF / Wireless Assembly; Through Hole
Assembly; Surface Mount Assembly; System Assembly; Printed Circuit
Board Assembly
